Skip to main content

1 reply

TMCC engine not working with DCS

JESSE GJESSE GOGR Forum Member

hey all I just got my first TMCC engines 2 altas O. I’m trying to run them with the DCS sense I don’t have the Cab 1 throttle but I do have the trainmaster bass and all the right hook up wires. My problem is I tried the #1 engine address like the book saids but the engines won’t do anything other then the engines lights are on and the speaker just hums. I have no idea what number the TMCC engines are programmed to sense but it’s not #1 so my question is can you Reset these back to Factory using the DCS remote sense I don’t have the Cab 1 thanks for any info! 

Original Post
Barry BroskowitzBarry BroskowitzOGR Forum Member MEMORIALIZED MEMBER

Jesse,

Just use DCS to change the engine's TMCC addressee to what you want it to be. With teh engine sitting on a powered track:

  • Menu/System/Engine Setup/Edit Engine/Edit Engine Address
  • Follow the prompts to set the RUN/PROG switch to PROG
  • Select a new TMCC engine ID#
  • Follow the prompts to set the RUN/PROG switch to RUN

That will set the engine's TMCC address to what you want it to be. Then, see if the problem persists.

DCS Book CoverThis and a whole lot more about DCS is all in MTH’s “The DCS Companion 3rd Edition!"

This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at MTH's web store!

Add Reply

Tags: DCS, Reset, TMCC
Views: 261
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×