I'm replacing traction tires on myth 20-3125-1 cab forward, I'm at the stage of installing the new tires. How do I stretch the new tires on the wheel without destroying them. I considered heating them in hot water so they will stretch easier. Any suggestions or help would be greatly be appreciated.
Thank you
Dana
Replies sorted oldest to newest
you can do the required stretch without damaging the tires if they are the right size. use of a flat head screw driver will help;
I never thought of a hot water bath and have no idea how well it will work
Bob C.
Bob,
The tires were in the box so I believe they would fit but I'll have to stretch them to fit. Tomorrow I'll try hot water or let sit in the sun to hopefully soften the rubber. I thought of screw drivers but I'm a little apprehensive about doing it. Nothing ventured nothing gained, what do I have to loose.
Dana
Access to this requires an OGR Forum Supporting Membership
