I recently acquired this engine and I need to do a reset of the TMCC system. It is not clear to me from the generic TMCC reset instructions which reset code is appropriate for this engine. It has TMCC with Cruise Control and was made around 2010.
Any recommendations?
Thanks;
Rolland
Replies sorted oldest to newest
Opened up the B unit and took pictures of the R2LC board and the motherboard.
Rolland
That is TAS. You can find those instructions in the Reference section. 8 would be generic diesel with smoke. G
Specifically, that's the TAS EOB board.
Thanks for the quick replies and confirming what I found in the reference material on this site. Since this unit does not have smoke I think 6 is the right reset code.
Rolland
Kinda' depends on what the smoke (feature) output is connected to. If it's a strobe, it would be 5, if it's a cab light, it would be 6.
EOB - Ernie on board. (Just kidding).
It's possible that the "Engineer" is named "Ernie". 
Access to this requires an OGR Forum Supporting Membership
