I deleted A mth 611 engine this morning and tried adding it back this afternoon but it doesn’t recognize the engine. After deleting an engine, does that cause problems when trying to reloaded
Original Post
Replies sorted oldest to newest
no
Hi Obdo,
Are you using the DCS app or a DCS remote to add your engine?
I’m using the DCS APP
Try resetting the app, which will wipe out any data, including other engines. Then reload each engine, starting with your 611.
Dave H, he has 2 other posts and one says his WIU has never worked?
https://ogrforum.com/topic/mth-dcs-app-2
I can't get any good answers back from him so I wish you luck on helping him move forward.
#1 he needs to update the WIU software.
https://ogrforum.com/...u-upgrade-to-premium
#2 he needs to establish signal on a test track to start
Dave H, I had the same problem. You need to update your firmware on your wiu to rev 1.10. There are directions on how to do this on u tube by just asking how to update mth dcs firmware on the wiu. If you can’t find it, let me know and I’ll send you instructions
