LC App Question

NS1975OGR Forum Member SUPPORTING MEMBER

I have several of the newer Lionel Legacy diesel engines with Bluetooth that can use the Universal Remote and the LC App. Obviously when I run the engines with Legacy everything works as it should but when I use the LC App the one thing that is missing is the sound of the prime mover. They all stay in the same idle speed sound no matter how fast the engine goes. The horn, bell, and crew talk are fine, it is limited to the sound of the engine not increasing with the momentum of the engine. So my question is does anyone else experience this with Legacy engines using the LC App and if so, is there a way to correct it? Thanks!

1/29/206:58 AM

❤️ 1

Original Post

Replies sorted oldest to newest

MartyEOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBERMEMORIAL SUPPORTER

I believe that is the nature of the beast. @Dave Olson can confirm.

1/29/207:15 AM

❤️ 0

NS1975OGR Forum Member SUPPORTING MEMBER

MartyE posted:
I believe that is the nature of the beast. @Dave Olson can confirm.

I was really hoping that wasn't the case.

1/29/208:25 AM

❤️ 0

NS1975OGR Forum Member SUPPORTING MEMBER

I watched the video and did all the updates but the issue remains. I am surprised that the Legacy engines with Bluetooth don't have the capability of the engine noise ramping up as the speed increases when using the UR and the LC App. If that is the case, so be it, but definitely disappointing.

1/29/205:07 PM

❤️ 0

MikeHOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Yeah, just checked mine. Never noticed that. Bummer.

1/29/205:24 PM

❤️ 0

MrMoe50OGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

The MTH app exhibits the same behavior when controlling Legacy engines through their wifi. MTH’s response originally was that they could not reproduce the problem in their lab, although I and others on this forum could on our layouts. They eventually acknowledged the issue and stated that they were replicating the legacy commands exactly so they could not determine the cause......

1/29/208:33 PM

❤️ 2

GregROGR Forum Member DIGITAL SUBSCRIBER

MrMoe50 posted:
The MTH app exhibits the same behavior when controlling Legacy engines through their wifi. MTH’s response originally was that they could not reproduce the problem in their lab, although I and others on this forum could on our layouts. They eventually acknowledged the issue and stated that they were replicating the legacy commands exactly so they could not determine the cause......

MTH actually did correct that issue on their last release of the DCS app. While the RPM's do not behave exactly as you might expect on the Legacy remote, they found a compromise to get it working. The RPM level is now tied to locomotive absolute speed steps in Legacy mode operation.

1/29/2010:43 PM

❤️ 2

CLICK HERE and Subscribe to the OGR YouTube Channel!

LC App Question

Add Reply

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!