2 rail on ross turnouts

No, I posted about glueing shims to the guard rails of ATLAS O turnouts. NOT Ross, as my layout is ALL ATLAS O.

Thanks Hot Water

OK wrong track.   SO what kind of glue did you use to glue your shims to the top your Atlas guard rails?

Clem

I used  Gorilla brand "Super Glue", and purchase it regularly at my local True Value Hardware Store. I use it for darned near everything around the house as well as the model railroad.

what do the guard rails look like?  How does this work?  The ones I have trouble with in 2 rail are the curved switches.  thanks

I was talking about Ross three rail turnouts, I run some equipment with scale wheels. The guard rails are a little lower than the running rail.

Clem

The guard rails are a little lower, but the rest of the turnout is so well constructed that the only issue I experience (11-degree) is with the frog. We have a #8 curved turnout (O-120/O-96) on the layout and we put in a moving frog point to support 2-rail cars as the frog is much larger.

A Close-up of the point frog that appears toward the end of the above video.

Here's another angle at the 1-minute mark.