TSA stops out of order after using “learn” mode.

I have a RailKing PCC street car with Proto-Sound 3.0  (30-5133-1).  This street car has 9 TSA stops.  I have a WTIU and started trying out the “learn” mode function.  Now, when I turn on “automode”, the 1^st of 9 TSA stops is skipped and the first TSA stop announced is the 2^nd stop.  It will cycle through all 9 TSA stops including the 1^st stop, but it will no longer start with the 1^st stop.

Here is what I’ve done trying to get back to the factory setting of TSA stop sequence:

• Remove and added street car in the DCS application.
• Feature and factory reset of street car with WTIU
• Feature and factory reset of street car with a DCS Explorer
• Feature and factory reset of street car using conventional method (Factory reset = H-B-B-B-B-B)
• WTIU feature reset
• WTIU factory reset
• Uninstalled/reinstalled DCS application from my Android device
• Tried the above on an Apple iphone.

So how to get it back to the stock sequence of TSA stops (1 through 9)?  And where (street car, DCS application, or WTIU) are the sequence of TSA stops stored after messing around with “learn” mode?

I know this is not a big problem but I want to get back to the factory TSA sequence that I’m used to.

TIA,

Rick