Holds LionChief, Atlas, CVP, Digitrax, Lenz, NCE & MRC Throttles
|
Replies sorted oldest to newest
Does a DCS hand held or Legacy remote fit in this holder?
Where's the cup holder for the beer?
You can stretch the holder or tighten it and then screw it in the wall. Both seem to work. I would recommend placing the remote control you are using in the holder place it against the wall and then screw the wall mount holder in. This way you can adjust the size fitting. Both are against a wall which helps it stay in place.
All you really need is the cup holder! Although for this first step you won't even need that!
1. Drink your first beer fast so you won't have to set it down.
2. Rip the top off the empty can.
3. Nail whats left to the wall.
4. Voila' instant remote holder.
I know it'll work, I saw it on the Red Green show!
KenJrTW,
I have 2 of the originals from about 15 years ago, purchased from Scott's Odds & Ends, Paid $7.50 for both way back then. One of our OGR sponsors, Train Elecrtics, might still have a few if he got them when Scott's sold out to him.
PCRR/Dave
You can see it in both pictures below.
Now that is nice, and gives me an idea.
Ken Jr,
Give us a Web sight where we can purchase them, if you have one.
I need another one for the Lionel Christmas Train I just picked up.
Sorry Ken I clicked on your picture and it took me to the web sight, thanks.
PCRR/Dave
Thank you Ken!
Does a DCS hand held or Legacy remote fit in this holder?
I have one Brian and it does hold the DCS remote just fine. The Legacy remote is too big for this holder beacause of it's shape.
Now thats something we can all use!
Thanks for the info Chris. As Quickdraw McGraw would say, I got some 'thinnin'" to do!
Access to this requires an OGR Forum Supporting Membership