Did a search and couldn't really find what I was looking for so let me explain what I want to do and see if it is possible. I am trying to wire some building and street lights and be able to control them with both an Atlas 205 connector (on/off switch) and an AIU. Is this possible and if yes how does the wiring go. I know how to wire each one individually both not both. Thanks in advance.
Replies sorted oldest to newest
Bryan,
Is this possible and if yes how does the wiring go. I know how to wire each one individually both not both
If you know how to wire it both to the AIU and the switch separately, just do both. For a discussion and detailed instructions, refer to pages 82 and 83 in The DCS O Gauge Companion 2nd Edition.
This and a whole lot more is all in "The DCS O Gauge Companion 2nd Edition", now available for purchase as an eBook or a printed book from MTH's web store site! Click on the link below to go to MTH's web page for the book!
Thanks Barry for the reply. I just didn't know if there was a way to do it using the same main feeder wire to the lights and branching off one going to AIU and one going to 205 Connector. I will wire it up tomorrow.
Access to this requires an OGR Forum Supporting Membership
