Skip to main content

I'm talking about the 48ft variety from the husky stack cars.  Was it hard to do? We're you able to remove the door handles and details on the end, then sucessfully reattach them afterwards?

I was thinking to repaint some of mine white with the yellow doors, then decal to 1990s jb hunt.

If you have pics, please post
Original Post

Replies sorted oldest to newest

This Atlas trailer likely was a project similar to what you plan. The door hinges are press fit into the trailer side and could be gently removed. I then used a push pin from inside and was able to push out most of the pins for the door detail hardware so that I could paint the doors. I carefully masked off the silver hinges.

 

RM

 

Originally Posted by Rich Montague:

This Atlas trailer likely was a project similar to what you plan. The door hinges are press fit into the trailer side and could be gently removed. I then used a push pin from inside and was able to push out most of the pins for the door detail hardware so that I could paint the doors. I carefully masked off the silver hinges that were molded into the door face.

 

RM

 

Post
×
×
×
×
Link copied to your clipboard.
×
×