I know this is a out of ordinary request to ask for pictures of raw kit components, but I am in need of a bridge kit to adapt to a special need. The only commercial kit that potentially fits my dimensional criteria is the Atlas 2-track truss bridge - item 6921. I could only find finished photos of the bridge on the internet. I have to determine if the truss members are stand-alone sections or pre-attached to the cross members.
Thanks.
Replies sorted oldest to newest
1
I can't remember if my single came assembled or I attached the sides but I know that had it completely disassembled to paint it. My photo download is really slow so I will try to show you the attachment points in several shots.
The bottom cross member supports were attached to my track bed as it came out of the box for the Double as well as Single Pratt Bridges.
The bridge sides were already glued and assembled. The sides are held in place by the five post pins that hold the sides to the track bed cross members. Then the support cross members on the top and bottom are glued in place.
To clarify, the bridge sides come assembled but not attached to cross members?
Access to this requires an OGR Forum Supporting Membership
