Atlas O 3r pilot spacer

Did you see if atlas has them? The B40 is structured a bit differently than a lot of the others.  It was the first diesel model and there is only one pilot, the 2 rail one is a 3 rail pilot with a “spacer”.  There’s no parts diagram online, so a phone call might yield results.

@Boilermaker1 posted:

Did you see if atlas has them?

Seems he did.

@nikko posted:

Atlas O parts is a NO."

The 3r model Dash 8 has ditch lights on the very bottom of the "body" in front.

Looks like the 2r picture Boilermaker1 posted has ditch lights as part of spacer.

Thanks All

Just got e-mail from Atlas,Steve sent me "pilot spacer part number".I will order and hope they work.

Thanks All

@nikko posted:

The 3r model Dash 8 has ditch lights on the very bottom of the "body" in front.

Looks like the 2r picture Boilermaker1 posted has ditch lights as part of spacer.

Thanks All

No... the ditch lights are my 3D prints that I added.  The factory ditch lights are on top of the walkway. In the photo you can see the walkway holes that I patched over.

My ATSF's,Dash 8-40-BW's, have the ditch lights under the front walkway.The SSW's and LMX Dash 8-40's have them on top of walkway.Let you know how I make out when the pilot spacers get here from Atlas.

Yes that is correct.  The BW has ditch lights below the deck.  It is all completely different tooling, none of the parts save for maybe the frame are the same.  
The one above was redetailed to look like an ATSF B40, but lots of changes from the factory model.