My PC is connected to my home internet via ethernet.
I downloaded and successfully installed the Base3 system utility on my PC.
Can someone point me to instructions for connecting my Base3 (on my home Wi-Fi network or the Base3's (AP) network) to the Base3 system utility on my PC.
I remember reading that this came be done but not sure where I saw it.
Thanks in advance for your help!
Stan
Replies sorted oldest to newest
https://control.lionel.com/doc...e3-wi-fi-connection/
Scroll down to the section: Join to Network Mode (without WPS), it's probably the surest to get you connected using the B3SU program. After that, you're going to want to go into your router's configuration and set a DHCP reservation for that IP address for the BASE3. That will insure it's always at that IP address and you won't have to keep finding where it is.
I've been using the LCS WiFi with this same configuration technique since I got it, it's great.
Maybe I didn't phrase the question clearly:
I'll try again:
Without installing a W-Fi adapter to my PC, how do I connect to the Base3 with my PC that does not have Wi-Fi but is on the same network as the Wi-Fi just connected to it by the ethernet cable plugged into the router?
Thanks!!
Access to this requires an OGR Forum Supporting Membership
