Skip to main content

So as the title of this thread goes I am building an elevated rail for my layout using Marx light towers and Erector set steel to support the track. My questions would be what worked best for you? I secured a couple of small boxes of bulk used Erector set items and I finished bolting the Erector set supports to the Marx light towers. My plan is to run an O42 loop above with no switches so I can run tinplate, new or old, or anything else. I welcome any suggestions, including what to do and what not to do. I did obtain some new track clips to keep the track together.

I have included a couple of the pictures of the light towers with the Erector set supports.

DSC_1608 [853x1280)

DSC_1609 [1280x853)

Attachments

Images (2)
  • DSC_1608 (853x1280)
  • DSC_1609 (1280x853)
Original Post
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×