I have a tank car 20-9205 that I want to put on an 'end of train' truck. I removed three small screws that I thought held the plastic frame on the body but even with those removed, the frame seemed secure. I was reluctant to pry on the frame but I need to get to the screw holding on the truck to the plastic frame. Wondering if I'm missing something obvious to take these apart.
Any help would be appreciated.
Ken
Replies sorted oldest to newest
Roo posted:Hi Ken.
...snip... I convert my cars to 2-rail. Roo.
I have one converted also, although I bought it that way at the Strasburg train show:
Hmmm, note to self; time to replace the plastic wheels with Intermountain metal wheels.
Dave. Those tank cars are nice.
I think Ken's question has been answered so here is my converted and unconverted cars and I have Intermountain wheels on the converted one I also used Weaver trucks to get it down lower which looks like yours is the same. One day I will do the other one.......one day.
Thanks guys. I will remove the screws and try again.
Access to this requires an OGR Forum Supporting Membership
