Could Someone Edit and Create a Custom MTH Sound File for Me?

Being more specific may help someone decide if they are interested.

(it's b3yondmb3yond equipment)   It is beyond my equipment.

Sometimes fighting Goofle spellwreck is an expanding black hole.

I've done several for myself and friends. It's fairly easy. What were you looking to have modified in the sound file?

Keep a copy of your original sound file.  

I have the same question as @ES44AC so I will be eagerly following this. 

Don't want to hijack this thread, but I would like to take the whistle from 20-3544-1 and combine it with the rest of the 20-3461-1 sound file.

Bryce

@Oscale_Trains_Lover_ posted:

I have the same question as @ES44AC so I will be eagerly following this. 

Don't want to hijack this thread, but I would like to take the whistle from 20-3544-1 and combine it with the rest of the 20-3461-1 sound file.

Bryce

That's probably one of the easiest things to do with the ADPCM program. Shouldn't take more than 5-10 minutes. 

@Lou1985 posted:

I've done several for myself and friends. It's fairly easy. What were you looking to have modified in the sound file?

 I have the latest run of the Premier GS-4 (20-3749-1) and for some reason instead of using the whistle recorded straight from the 4449 from the previous PS3 release they used a really deep sounding whistle that barely sounds like anything to my ear. 

I would switch out the sound set from the 2013 release of the GS-4 but the passenger announcements read train 98/99 the Morning Daylight, where as the numberboards on mine read and announce train 2, the Sunset Limited. 

Basically I want the standard whistle as well as all the soft key toots (SXS, SFS, SRS, S01) swapped for the whistle on 20-3484 so I can have the better whistle but keep the existing passenger announcements.

But wait, there's more!

Since I'm not much a fan of the quilling whistle from that particular sound set, I'd like the quilling whistle swapped with that from 20-3435-1. That whistle pretty closely matches the SP 6 chime that was mounted on the fireman's side of the 4449 in the 80's. 

And lastly I'd like the default 1225 bell replaced with the accurate recording of the 4449 bell from 30-1668-1 (why they didn't use this bell to begin with is beyond me!)

Let me know if that's more than what you're willing to do!

That's actually fairly easy to do. It's just a matter of downloading the files and telling the program which files to pull what sounds from. Probably take an hour tops.

@Lou1985 posted:

That's actually fairly easy to do. It's just a matter of downloading the files and telling the program which files to pull what sounds from. Probably take an hour tops.

If you're up for it, a new file would greatly be appreciated. 

@ES44AC posted:

If you're up for it, a new file would greatly be appreciated. 

I'm a little busy at the moment but if someone else doesn't beat me to it I'll try and put it together over the weekend.

@Lou1985 posted:

I'm a little busy at the moment but if someone else doesn't beat me to it I'll try and put it together over the weekend.

That would be great! I appreciate your time.