After menu>system>dcs setup>fixed 1 and went from on to off and now to on all engines in the layout start up a full volume and any commands say check track. How do i recover normal operations?
Original Post
Replies sorted oldest to newest
Menu/System/Dcs set up/ AON (s3) ...all channels on
Maybe you hit AOF instead of off. AOF..all channels signal off.
TIU on first?
TIU on first?
Absolutely!
Willygee,
Bill power your TIU thru the aux with a RS 18/24 power supply if you are powering thru Channel #1 this could be part of why you are having problems, the TIU must be powered to make the changes correctly.
Great Avatar picture of you and the better half by the way!
Hope all is well in Maine.
PCRR/Dave
Originally Posted by Pine Creek Railroad:
Willygee,
Bill power your TIU thru the aux with a RS 18/24 power supply if you are powering thru Channel #1 this could be part of why you are having problems, the TIU must be powered to make the changes correctly.
Great Avatar picture of you and the better half by the way!
Hope all is well in Maine.
PCRR/Dave
TIU is powered @aux power in w/ z500 brick..all is well now except some MU member engines reintroduced eng sounds,an easy fix.Thanks all for such a rapid response.I almost went to TIU reset but jumped on the forum instead..what would have happened if i did?
Originally Posted by willygee:
Originally Posted by Pine Creek Railroad:
Willygee,
Bill power your TIU thru the aux with a RS 18/24 power supply if you are powering thru Channel #1 this could be part of why you are having problems, the TIU must be powered to make the changes correctly.
Great Avatar picture of you and the better half by the way!
Hope all is well in Maine.
PCRR/Dave
TIU is powered @aux power in w/ z500 brick..all is well now except some MU member engines reintroduced eng sounds,an easy fix.Thanks all for such a rapid response.I almost went to TIU reset but jumped on the forum instead..what would have happened if i did?
from pine creek...
Great Avatar picture of you and the better half by the way!
Hope all is well in Maine...so true, i'm lucky
Willy,
I almost went to TIU reset but jumped on the forum instead..what would have happened if i did?
Pretty much the same outcome.
Resetting the TIU turns on the DCS signal on all channels. However, you would have lost any Record/Playback sessions or Custom Sounds that you had previously saved.
This and a whole lot more is all in MTH’s “The DCS O Gauge Companion 2nd Edition", available for purchase as an eBook or a printed book at MTH's web store!
Bill,
Barry indicated that the entire TIU would reset and your recordings would have needed to been redone. On the subject of your incredible sound system, have you made any progress on miniaturizing your super realistic railroad sound package? With some of these new APS available now, your entire neighborhood must sound like a real railroad station/yard.
PCRR/Dave
Originally Posted by Pine Creek Railroad:
Bill,
Barry indicated that the entire TIU would reset and your recordings would have needed to been redone. On the subject of your incredible sound system, have you made any progress on miniaturizing your super realistic railroad sound package? With some of these new APS available now, your entire neighborhood must sound like a real railroad station/yard.
PCRR/Dave
My original PS3 diesel wireless to subwoofer sound system is working so well i havent attemped any re-engineering...maybe this winter. 
Did I hear somehting about Willygee upgrading DCS remotes to being fully rechargeable?
Matt,
If Bill is nice enough to help you out, he does a fantastic job at upgrading DCS Hand Held Remote Controls to fully Rechargeable, his work is 1st class, and he has upgraded 2 of mine already. You may have to get passed his better half for him to allot time for the upgrade however. Heck I want him to miniaturize his sound system, so I can have one also.
Only Kidding about the better half Bill!
PCRR/Dave
