Skip to main content

I have a 2020 MTH Railking Santa Fe Dash 8 that seems to have been damaged due to over flooding the smoke unit.  Smoke was coming from the sides and bottom of the engine, not from the top. I turned the engine over to drain any excess fluid.  The engine has less than 6 hours use.  When I restarted the engine it moved forward and stopped. I checked the Z-1000 transformer to see if the fuse was tripped.  It was not.  When I attempted to restart the engine it was silent except when I removed power from the track and I heard a high pitch sound which sounded as if the capacitors were discharging.  On the third attempt the engine made a clicking sound.  I immediately cut the power.  

I removed the shell and cleaned out the oil based residue and thoroughly cleaned the smoke unit.  When I attempted to restart the engine, my TIU would not acknowledge the engine.  I tested the TIU with other engines and it’s fine.

Please advise a reputable place to send the engine to for repairs.  I used Stockyard Express in the past to repair my TIU and it is still working well. Please help.

Original Post

Replies sorted oldest to newest

First try factory reseting the engine in conventional mode with a transformer; 1 horn/whistle and 5 bells. It might be the TIU sent a weird command to the engine and confused the board, I have heard this on my models before and it usually clears up after cutting the power while it's started up.

Also for the future provide a product number so we know what we are looking at.

Last edited by MichaelB

Add Reply

Post
This forum is sponsored by MTH Electric Trains
×
×
×
×
Link copied to your clipboard.
×
×