Skip to main content

3 replies

Failed TIU Fixed Output #1 Help

Rod StewartRod StewartOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Hi All. Well I guess it was bound to happen. We have a Christmas train show layout set up at our local mall here in Sedona, AZ, and I am using a spare DCS set that I have not used in about 5 years or so. The TIU is a Rev I3, and was working fine when last used, as best I can recall. Discovered today that Fixed output #1 is zero, nada. Meanwhile Fixed output #2 is working normally.

Any suggestions on the likely suspect(s)? Any help is greatly appreciated. 

Rod

Original Post

Replies sorted oldest to newest

Add Reply

Views: 269
Post
The DCS Forum is sponsored by

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×