FasTrack Command Control Switches and Routes with an ID less than 10

I have 3 072 command switches on our Christmas layout and have not had that issue.

I have three routes built and they are numbered 1-3 via the Legacy remote.

I did have some issue with switch #1 not always activating when firing certain routes but I believe that the throw delay time adjustment on the Legacy remote remedied it.

Interesting, is the throw time adjustment made in the legacy remote?  I might have to dig out my manual and try that.

I made routes numbered 1-3 and none of them worked.  I moved them all to be 10-13 and they all worked flawlessly. 

thanks for your feedback!

What version of the Legacy software are you using? I think one of the upgrades addressed that.

The throw adjustment time is made in the Legacy remote. It's in the same scrolling options as where you can adjust the screen brightness, velocity throttle, etc.

I am running 1.51 currently.

Thanks for the replies. I am running the latest software And I still had trouble with routes in the single digits but adjusting the time from .5 seconds to 1 second made them work.