Skip to main content

I have a misbehaving MTH SW-1500 diesel switcher with PS-2 sounds; it won't respond to track power and it won't accept signals from my DCS REMOTE COMMANDER device. Probably a burned-out chip or circuit board.

As I understand it, the MTH PS-3 sound set is much better, so I toyed with the idea of having this loco repaired and the sound system upgraded. Then I read info on this FORUM that the DCS REMOTE COMMANDER will be phased out as MTH moves toward WiFi and app configurations for loco control.

Since all my other locos are Lionel, I'm reluctant to invest in additional MTH DCS gear for the sake of just one loco. I'm wondering ... would it be feasible modify my SW-1500 diesel; i.e., remove its DCS electronics and install TMCC control and sound gear by ERR?

Comments welcome.

Mike Mottler    LCCA 12394

Last edited by Mike H Mottler
Original Post

Replies sorted oldest to newest

This MTH SW-1500 (UP #1108) has a ERR DC Commander but no sound (I just did not try to shoe horn a sound system in it) I added sound into a dummy Kline MP15. The Dummy MP15 has a ERR E8/9 sound unit and coil couplers.

At times I also run the SW-1500 with a dummy Weaver GP-38-2 with ERR GP7/9 sound unit.

Gunrunnerjohn would be your best bet, He has help me and others with ERR problems and if anyone can get TMCC control and sound in a SW-1500 it would be Gunrunnerjohn.

 

CIMG2998

Attachments

Images (1)
  • CIMG2998

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×