Skip to main content

This would be the recently released Atlas 21" CZ observation cars.  I didn't take the car apart yet, but looking through the windows the seats seem to only raise about a quarter of an inch (if that) above the floor.  I have 1:50 passengers I wanted to populate the car with, but it looks like I'd have to cut their legs off to seat them properly.  Before doing that, I'd add plastic to the seats to make them higher and paint.  The windows have an aquamarine blue tint so I imagine the colors are going to be skewwed.

 

Rich 

Original Post

Replies sorted oldest to newest

For what it's worth, Atlas O had a video you should watch about how to "open up" their passenger cars. The video was produced when the replace window strips were made available to replace the as-delivered ones with the blinds on the outside of the windows. I would suggest you watch the video prior to attempting to "open up" your Atlas O passenger cars in order to install people.

Chop their feet and glue their azz to the seat.

Many years ago I added 400 passengers to my 14 MTH Super Chief.  That included two standard domes and one full length dome.  The most casualties were in the diner because I had to chop just below the waist since there was no room under the tables.  Once the cars were put together nobody could tell.

It was well worth the time and effort.  Besides, as Art already stated, they got to ride FREE forever.

I tired putting 1/48 and 1/50 people in the regular CZ dome. They don't fit, even cutting their legs off, their bodies are too tall. Their shoulders are above the headrests and their heads won't fit under the glass. I ended up using 1/75 people just in the dome, and they look much better. Their heads are at the headrests, as they should be.. unless you're 8' tall. 

 

I used the larger people in the bottom portion of the car, still had to remove legs, and they still look too big. With the window blinds, you can hardly even see the people on the lower level anyway, but I still filled the seats since I had the car apart.   

 

IMG_0985

IMG_0992

Attachments

Images (2)
  • IMG_0985
  • IMG_0992
Last edited by Former Member
Originally Posted by Laidoffsick:

I tired putting 1/48 and 1/50 people in the regular CZ dome. They don't fit, even cutting their legs off, their bodies are too tall. Their shoulders are above the headrests and their heads won't fit under the glass. I ended up using 1/75 people just in the dome, and they look much better. Their heads are at the headrests, as they should be.. unless you're 8' tall. 

Great information. Now were did you obtain 1/75 size sitting people, please?

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×