I could use some help can anyone tell me what I need to install the led strip lights in the cars. I bought the lights that a member put in another post (not here yet) but not sure what I need to hook them up I run conventional I assume I need bridge rectifier and or capasitor not sure tho or how to go about hooking them up part #s size would be great and where buy any help would be great.
Jeff
Replies sorted oldest to newest
This is more for command operators ,but will work in conventional if you don't mind them dimming with the track voltage.
I run conventional and use individual LEDs. A few circuits here
You can also us a buck converter,set at around 6 volts. It will light the LED strips at constant brightness,but not full brightness potential of the strips. Brightness level desired is subjective.
The buck converter is described here
GRJ sells plug and play conversions,not sure how well they work in conventional.
Dale H
Here is a link to gunrunnerjohn's LED Lighting Regulators. Easy and they work from 5-19 volts. Also, gunrunnerjohn is here on the forum, should you need any assistance.
Thanks Dale and rtr12
Access to this requires an OGR Forum Supporting Membership
