I have a legacy ten wheeler that I want to add a rear headlight to. This locomotive didn't have one on the tender and there doesn't seem to be a spot on the rail sounds board to plug one in. Is there a way to add a functional light to it? I would like it to turn on in reverse like all my other legacy locomotives do. If it is not possible I will still add a headlight but it just will not be functional.
Replies sorted oldest to newest
Hi Jim, I did this to my Crescent about 4 months ago and it was pretty easy.I have to look back in my notes and I can tell you where I hooked the wires up to.
I also will have to look up your engine and see if it's the same
Alex
Hi Jim, I did this to my Crescent about 4 months ago and it was pretty easy.I have to look back in my notes and I can tell you where I hooked the wires up to.
I also will have to look up your engine and see if it's the same
Alex
Geez Alex!
Not only are you the "Sultan of Smoke" and the "Chief of Chuff" but now you're the "Lord of Lights" too
Can't wait until I get my Dreyfus so you can give it the full Alex.
I believe the light will connect to the IR interface board.
Access to this requires an OGR Forum Supporting Membership
