ISSUE RESOLVED !!!!! Legacy Conrail SD70MAC horn honking issue in conventional

Highroller2000OGR Forum Member

I got a brand new Legacy SD70MAC locomotive and it as a strange behavior in conventional mode with CW-80 transformer.

When it start to crawl at low speed the horn keeps honking by itself (at around 12V-13V on the tracks) and it seem to honk at each time I increase the throttle lever until it reach medium to high speed (when more than about 13V on the tracks).

I can still can hear the normal engine and crewtalk/towercom sounds in the background.

I tried other Legacy and TMCC loco with the same transformer and I cannot reproduce the issue.

Any clue ?

Thanks

9/12/1710:52 PM

❤️ 1

Original Post

Replies sorted oldest to newest

MoonmanOGR Forum Member

is this 6-81141?

at 13-14v the boards are getting enough power

Check the manual to determine if a battery is required for the railsounds in conventional mode

This one may just be more sensitive to the voltage minimum

9/13/176:38 AM

❤️ 0

Highroller2000OGR Forum Member

Its the 6-81140 from a Big Blue set.

Normally the don't need a battery in conventional but as you say, maybe this one is more sensitive.

Thanks

9/13/178:41 AM

❤️ 0

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Dirty pickups, wheels, and/or track is the top suspect. Since others don't do it, clean the wheels and pickup rollers.

9/13/179:34 AM

❤️ 0

Highroller2000OGR Forum Member

I resolved the issue by adding a lighted caboose with my SD70MAC. Now everything work perfectly !!! No honking horn and smooth running loco. I assume some Legacy unit are a bit sensitive with the CW-80 in conventional mode.

9/14/178:33 PM

❤️ 0

CLICK HERE and Subscribe to the OGR YouTube Channel!

ISSUE RESOLVED !!!!! Legacy Conrail SD70MAC horn honking issue in conventional

Add Reply

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!