Skip to main content

OK, I finally made the plung into the world of Legacy.  I know its about time, have a ton of TMCC stuff.  In any case, I picked up a used Legacy diesel for cheap.  The only issue is that there is no orange module for the engine.  So, how do I add the engine to the remote manually? 

 

Please advise!

 

Thanks,

 

Glenn

Original Post

Replies sorted oldest to newest

Assign it a unique ID using the Pgm/Run switch procedure. 

 

Once that is done, select that ENG address on the remote if not already done from the Pgm procedure. Push info button. 

 

Select engine type as diesel, select control type as Legacy, select sounds as LRS. Name it and assign a road number. Hit the set key. It's all in the info menu and fairly easy to navigate through once there. 

Last edited by MartyE
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×