Skip to main content

My Legacy Command Base and Cab 2 have soft ware version 1.52. My VL GG1 needs Legacy ver. 1.6 to access the pantograph control function. I have been on the Lionel site and I only see information about upgrading the very early versions of the Legacy soft ware. I see nothing about upgrading form version 1.52 to 1.6.

Am I missing something on the Lionel site?

Thanks for you help,

Richard

 

Original Post

Replies sorted oldest to newest

Thank you for posting this topic and the information to download.  I need to do the same thing but have few questions:

  1. How does the writable module (6-37125) work with the download from the lionel site?  Does it plug into your computer?  The prongs of the modules seem different from the devices that normally plug into your computer.  
  2. I noticed on a picture of this item on ebay Lionel recommends you get one for the base, one for the remote and one for back up....is it necessary to get 3 of these modules for upgrading purposes?

Thanks for your insight.

Greg

Ken M posted:

I thought you could use the wifi module for back ups?  I that is true how do you do it?

Thank You

Ken M

I use the LCS WiFi unit instead of the wired serial port.

I set the LCS WiFi switch to "Join To Network" which seems to work best by joining to the house WiFi. My desktop is connected with an Ethernet cable, but also has WiFi which joins to the house WiFi.

I have tried the Access Point option, but connect quicker with the WiFi to the desktop.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×