I’m having an issue with my F3 NYC set. It’s a LionChief Plus 2.0. It dropping the TMCC signal. At first I thought it was the track because it was happening at around the same point on the loop. I switched it over to Bluetooth and there is no issues.
After it drops the connection the Nonpowered A unit still responds to commands. I put the powered locomotive up on rollers and set it for medium in TMCC mode. It runs for approximately 3 minutes then the headlight flickers and the locomotive stops responding to commands. I have repeated this test three times and the locomotive consistently stops after about three minutes. Bluetooth operations are completely normal and unaffected. I checked this by turning the Bluetooth on and running the locomotive for five continuous minutes.
what could be going wrong with this locomotive?
