Lionel LEGACY 6-38472 SWITCHER SMOKE ISSUE

Jerry AOGR Forum Member DIGITAL SUBSCRIBER

Hello everybody,

I just purchase the subject Switcher and am having a problem with smoke going all over the place. A little goes out of the exhaust but a whole bunch goes elsewhere out of the front and rear of the engine and I would like to seal it off. Please look at the pictures and tell me if anything might be missing and please suggest some way to seal it off so the smoke just goes out the exhaust like it should. I added a piece out of thin cardboard to the top of the cab and that still doesn't help. I can be contacted at jba435@gmail.com.

Your help is really appreciated, Jerry

Attachments

Hide

Images (3)

12/6/1711:30 AM

❤️ 0

Original Post

Replies sorted oldest to newest

Richie C.OGR Forum Member SUPPORTING MEMBER

There have been a number of threads dealing with this issue.

https://ogrforum.com/...or-lionel-smoke-unit

12/6/1712:47 PM

❤️ 0

Richie C.OGR Forum Member SUPPORTING MEMBER

Also,

https://ogrforum.com/...46#75762911718588746

Make sure the screws holding the shell to the frame are also tight enough to create a good seal (don't overdue it). Also, make sure that everything is lined up properly so smoke isn't escaping due to misalignment of the holes.

12/6/1712:51 PM

❤️ 0

rtr12OGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Also, try blowing down the stack?

12/6/175:50 PM

❤️ 0

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

I'd perch a self-adhesive foam gasket on the shell to seal the opening, looks like the shell doesn't seat firmly on the smoke unit. I buy the foam at a hobby shop, it's about 1/8" thick and has a peal-n-stick backing.

12/7/1710:32 AM

❤️ 1