Lionel Scale 6200 smoke units

They just push up and out. The Seuthe style smoke units are tapered so again, they just got pushed into the boiler through the top down into the inside of the boiler.

Obviously be careful with the epoxy blob around the wires as that is how they are manufactured.

Sorry to hear of your fire and damage. That said, you also could just clean in place, soap and water would not hurt them. They are just a ceramic or fiberglass rod with resistance wire wrapped up around that central post.

Thanks Vernon, have used all types of cleaners. Soap and water won’t cut the residue found that Murphys oil soap   Full strength with a chip brush and hot water work best.

John

Well they will not come out. Guess I will try the wash in place method.

I'm confused.  I've taken dozens of these out of a number of brands of brass locomotives, they have always just pushed up and out.  Reach in there and wiggle them gently back and forth and then push up toward the stack, they do come out.

Thanks for the reply John. I have tried, there’s 4 of them. Haven’t been able to get any out. Maybe the heat did something to it? I have already washed it. They will need to be removed eventually because it will have to be repainted. That’s for another day. For now it’s cleaned and I got the frame running! So in a box, I have many more to clean and test.

thank you

John