Just picked up a GP30, TMCC Odyssey. One of the best detailed engines I have. Great sound and control.
However, is there a way to turn the interior cab lights on and off using either a Legacy or Cab 1 remote? I know I can turn the head light on and off, but I have yet to read how to turn off the interior cab light. Don't even know if it is possible.
Thanks
Ray
Replies sorted oldest to newest
Press Aux 2 and Brake should toggle the cab lights on and off
again another thread that the 6- number would be helpful.
6-28840
Yes, the engine I bought was 6-28840.
I have the same engine I was wondering the same thing as you.
DaveP,
Thanks for the reply. I have a Legacy remote. Just tried the Aux2/Brake. Only the headlights went out, not the cab interior lights.
Does the feature you suggested, Aux2/Brake, only work with a Cab1?
Are there other options, not listed in the Lionel operating manual, that would provide other features in operating TMCC engines?
Note to: Suzukovich, did you get that option to work on your engine?
RAY
I haven't had a chance yet. Currently in the process of rewiring the layout due to DCS signal issues and prepping it so I can put the Christmas Tree up on it. Will be powered up in a couple of hours then I will try it and let you know.
Very few TMCC locomotives have separate cab light controls. Some Legacy models use the R4LC smoke output to control cab lights. Try the smoke on/off key sequence, since it has an AC regulator, it doesn't use the R2LC smoke output.
I'm guessing you can't control them from the remote. I have a little board that I use in diesels that gives me Rule-17 lighting and cab light control... 
Access to this requires an OGR Forum Supporting Membership
