We now have wheel sets for the McCoy standard gauge locos.
MS-1001 is a 6 wheel set, available in red or black, 6:32 rod holes & .185 axle bore...…$60.00 set
MS-1002 is a 4 wheel set , same specs, $44.00 a set.
CMT wheel sets will be available in mid July.
Thank you. Harry
Replies sorted oldest to newest
Thanks Harry. I bought a 6 wheel set last year and they worked out great. I need a CMC/CMT set.
Steve
Steve,
Can you tell me if the CMT axle sizes are all the same? The wheels I have seen so far are all plain ( no gear lugs), and the 'offset' has to be machined off. The rod holes are 8:32 on a 6 wheel set we just made up for a customer. Are 4 wheel specs the same? Thank you for any info. Harry 
Harry, CMC & CMT are the same. They used MEW wheels. I went to measure an axle, but the battery is dead on the calipers. I'll get back to you when I can get a new one.
Steve
Steve, good reason to have a plain mechanical caliper, I got tired of the battery being dead in mine! 
The axles measure .188
Steve
Thank you. That is the same as McCoy.
We also made a run of standard gauge loco axles for Lionel, McCoy & Ives. Harry
I'm sure all of my fellow Standard Gauge enthusiasts share my appreciation of Harry's ongoing efforts to keep these parts (and others!!) available. It's fantastic! Also, thanks to Steve and others on this forum who share their knowledge freely. Well done, gentlemen!
Access to this requires an OGR Forum Supporting Membership
