Skip to main content

I noticed on a unit I have been working on that it’s got a gear noise in the front 6 wheeled truck. After disassembly and motor removed, the truck is nice and smooth. I did notice when the motor is turn by hand, it has what I describe as a clunk as it rotates no noise, just a feel. Like feeling it clunking through the magnets ( if there is such a thing in these motors, I am assuming there is) the other motor is nice and smooth.  This gear noise is way worst in one direction. I should say that it never did this before until I had to remove the motor from the truck for some wire repair. After reassembly it started doing this. Kinda at a loss as where the gear noise is coming from, unless it’s something to do with the motor. Unit has about 30 miles on it.

Original Post

Replies sorted oldest to newest

Add Reply

Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×