How does one pop off the body from the frame? Where's the catch?
Attachments
Images (1)
Original Post
Replies sorted oldest to newest
Looks like the yellow tabs at each end need to be pushed up through the frame. Pull each tab to the end of frame before pushing up.
The tooling for this caboose has changed over the years. If the above doesn't work, then try this ... The black plastic end frames (end platform/railing part) has tabs that go into the ends of the body shell. You have to wiggle the black plastic end frames while you gently pull them straight out (away from the end of the caboose).
Stu
NOT has it right.
Not and Chuck are correct, just confirmed it on my 9064, wiggle the end platforms back and the chassis will be loose.
Attachments
Images (1)
Thanks, guys. I didn't think of pulling out the platform bottoms. I'm glad I asked, instead of breaking it.
