Skip to main content

I have these 2 locos for less than one year.  The coupler knuckle will open randomly.  I have disconnected the power to the coupler and the issue still occurs, so it is not an electrical / board issue.  Has anyone ran into this issue with PS-3 locomotives?

This is the first I had  this happen, previously, on my PS2 or PS3 locomotives.

Thanks,

Doug F

Original Post

Replies sorted oldest to newest

@Bruce Brown posted:

I have the Atlas version of this MTH engine and had a bad front coupler right out of the box. Atlas fixed it in a week. Another recently purchased MTH F3 also had a bad coupler. The store was quickly able to make the repair with a new one.  Many people just epoxy the defective couplers in the closed position.

Thanks, I will check if it is still under warranty, Guess I have been lucky to this point.

Doug

Add Reply

Post
This forum is sponsored by MTH Electric Trains
×
×
×
×
Link copied to your clipboard.
×
×