hello
i bought a blue comet set witrh the 831 cab # it did not come with the instruction book i looked but could not find a switch to turn off the moke unit the smokw kills my wife and how would set the e unit to go in one direction
thank you
kevin
Replies sorted oldest to newest
Kevin,
Please provide the catalog number of the engine. You will find it on the end of the box. Then people can properly and knowledgeably respond to you.
Chris
LVHR
Early PS-1 has smoke switch on engine under cab. PS-2 5V could be on engine or on tender. PS-2 3V on tender. Manuals usually on MTH web site under support. G
i did not get any boxes but i went on line and found the # it is 30-1172-0 it has the loco sound
thank you
kevin
Your engine was built in 2000. That makes it an early PS-1. Like G says, look under the cab for the smoke switch.
Chris
LVHR
hello
that was the 1st place i looked i did not see one anywhere. i will post picture after work
kevin
MTH made a lot of versions of this engine. You need to be sure what it is. Does it have a mechanical or electrical coupler? If no switch, it could be a pot on the tender. One is volume the other is smoke. But again, PS-1 and PS-2 with circuit board in the engine have smoke switch on engine. G
hello GGG
i see nothing under the engine and the tender has a volume knob that you turn with a screw driver a switch that has on and off it dose not say smoke
kevin
That switch is the smoke. So board must be in tender. G
Thanks for the info i will try it tonight kevin
Access to this requires an OGR Forum Supporting Membership
