Skip to main content

I bought one of these and hooked it up.  I cannot get the car to stay on track.  It catches going into the car wash and comes off.

 

There is a slotted track with a white piece that goes around the building.  On top of that is a red piece that slides over the white piece.  The red piece is to catch the car and take it around.  On mine the red piece is very loose fitting.  It comes off the white piece easily and also doesn't grip the car well.  Can anyone comment on whether theirs is the same and how to attach the car so it won't hang up in the turn into the car wash?

Original Post

Replies sorted oldest to newest

David remove the screws from under the base and insure that the guide is traveling freely around the groove and nothing is loose and binds the guide entering the car wash at that point. I have attached the parts diagram link to give you an exploded diagram to review.

 

http://mthtrains.com/sites/def...loded/30as12768e.pdf

 

IMG_4721

Last edited by dk122trains

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×