Skip to main content

Replies sorted oldest to newest

The simple answer is no.  The LGB MTS system was/is their own proprietary system that if I read correctly is based on DCC but from what I can tell is semi proprietary (it sounds like it has proprietary extensions). MTH DCS control system is their own proprietary control system designed to control  PS2/PS3 engines. DCS can also interface with the Lionel TMCC/Legacy command bases and operate engines equipped with that. The DCS system isn't compatible with DCC (even if the MTS system will allow a DCC command base to control it, not sure about that).  In theory you could buy a PS3 board set and install it in the LGB trolley (assuming there is room) and use DCS to control it (raises another question, can DCS work with a 12v DC system? I assume so, given MTH produced HO engines with DCS decodrs), but I suspect that is more effort than it is worth.

Add Reply

Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×