Skip to main content

Just a little help, 

 1) where or how can I get,  one of those plastic fluid accumulators, for the inside of shell.

       can not figure out why the Mth parts site shows unsecure certificate

 2), I have  NEVER , done anything of this sort,  how can I mount the unit ( which Box car Bill)

      has already sent.   somebody's pic showing this would be fantastic

thanks

 

Last edited by arrsd90
Original Post

Replies sorted oldest to newest

The certificate issue has been there for quite awhile just accept and you get to the website.

 

Best to call Midge and ask for the part number.  You need your model number.  Many of the PS-2 F-3 have parts list on the web.  Look it up the gear symbol when bold is active.

 

Otherwise you are on your own with a custom fit up.  Did BB send a Lionel fan unit?  You will have to custom fit a funnel to the brass fitting of the lionel unit.  You can use brass tubing found at hardware stores or your LHS.  G

MTH Smoke Unit Assembly

Typically, the MTH smoke units have legs for convenient mounting. Mount the unit to the metal base frame of the locomotive, and extend the smoke chimney (yellow part) using flexible plastic tubing to where you want the smoke to exhaust from the engine.

 

You can download the sketch by selecting the icon below, and using "Save Image As."

Attachments

Images (1)
  • MTH Smoke Unit Assembly
Last edited by Bobby Ogage
Post
×
×
×
×
Link copied to your clipboard.
×
×