MTH part # needed

Chuck,

No problem...

Individual board part numbers

AE-1000035PS3 Stacker Board   {not for 70-3026-1 & 70-3027-1}

AE-1003V36PS3/2 Board (w/ white 3v PS2 connectors)

AE-1005V36PS3/2 Board (w/ black 5v PS2 connectors)

AE-1003G35PS3 G-Gauge Stacker Board  {for 70-3026-1 & 70-3027-1} ONLY

Set board part numbers

AE-1000035-3V   PS3 Stacker & PS3/2 Board (w/ white 3v PS2 connectors)

AE-1000035-5V   PS3 Stacker & PS3/2 Board (w/ black 5v PS2 connectors)

AE-1003G35-3V  PS3 G-Gauge Stacker & PS3/2 Board (w/ white 3v PS2 connectors) {for 70-3026-1 & 70-3027-1} ONLY

Thank you Barry. Waited a week for MTH's reply, got the information here in 10 minutes!

Chuck,

Are you an MTH ASC? If so, you should get on the ASC E-mail distribution list.

Have been from the start, otherwise I couldn't order the part. The circuit board guide doesn't list them.

Chuck,

The information that I provided you was from a recent E-mail from MTH to all ASCs. If you didn't get the E-mail, I suggest that you verify your inclusion on the list.

Note that the individual parts are not available necessarily available, I already made that mistake.  I ended up with the AE-1005V36PS3/2 top board and no way to get the bottom board.  I had to reorder the board sets to get my boards.

gunrunnerjohn posted:

Note that the individual parts are not available necessarily available, I already made that mistake.  I ended up with the AE-1005V36PS3/2 top board and no way to get the bottom board.  I had to reorder the board sets to get my boards.

Huh?  You can still order them individually. G

Chuck, have you been getting all the service bulletins?    

GGG posted:

gunrunnerjohn posted:

Note that the individual parts are not available necessarily available, I already made that mistake.  I ended up with the AE-1005V36PS3/2 top board and no way to get the bottom board.  I had to reorder the board sets to get my boards.

Huh?  You can still order them individually. G

You can order them individually, but they claim "not available".  However, the combined board set is available.

I explained this in another post.  So it is time, not that you can't do it.  They are suppose to be splitting up the set boards to fill the individual orders.  G

Well, they didn't split them fast enough, I waited a couple of months.

Barry, G, Gun, Marty, thanks guys. I get Jason's bulletins, but missed the one 1 needed. Don't know if it didn't come through, or I deleted it. Copied Barry's list. Was this a recent bulletin, or several months old?  

Chuck,

Maybe 6-8 weeks or so ago.

Chuck,  I do not normally go to the tech section on the MTH Website, but when I saw Jason e-mail I realized I had missed some too.  So I went to the tech section and they were posted there.  So when in doubt check the ASC section.

John, The first portion of the several months was because they were waiting for the shipment of new boards.  I just finally got my invoice for separate stackers I was waiting for along with some PS-32 3V sets.  I had to call in and squeak to get some oil! G