MTH TIU and TMCC Question

I can't address the wifi issue, but others can.

By connecting your TMCC Command Base to the TIU with the MTH Cable you can control TMCC engines via the DCS remote.  Since the TIU has variable outputs you can use those to control the PW engines or any conventional engine such as PS-1, Williams, Etc.

The Fixed Outputs are good for the command only loops since you will have input voltage directly go to the output.

G TIU does not have internal fuses, but the ZW-C has great breakers on the Power Houses and Z-4000 will roll back Voltage and warn you on an overload.  I still would recommend some external 10amp fuses as a back up.

You really have a lot of options based on the transformers you have especially wrt the conventional engines.  G

Dear GGG

Thank you for your reply on this matter. What TMCC Command Base would recommend and what is the part number for the MTH Cable?

I also have a fast acting circuit breaker from Digi Key with TVS in a project box so that should give me more protect for the TIU.

Kris