Skip to main content

I should of taken pics ( actually know I did but not sure where they are stored. Anyway it had a couple spots that looked like acid burns of some type. and missing a fair amount of paint. In this pic you will see a actual correct painted two tone green 817 Caboose and then below the paint I found at home Depot and Wal-Mart in a spray can. Just trying to get some comments on how you all like it. 

IMG_5091

After seeing the final results I kinda like it. The orange windows and the Black frame are original, I sent the roof pieces and the caboose to a friend who sandblasted it and primed it for me, Then I took over. 

Attachments

Images (1)
  • IMG_5091
Original Post

Replies sorted oldest to newest

I think it looks fine but what matters is what you think.

You can even light it if you wish the truck will accept the same roller pickup assembly as the 807 passenger cars you just have to rivet it in the holes there are 4 the middle two are the ones used and should be a small hole in frame behind truck to run the wire for a light.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×