I have gargraves track and some atlas o track.I need atlas o pins that will mate with gargraves.I know that there was around for a time.But its been a good while since I had need for some.Any help I will very greatful.
Original Post
Replies sorted oldest to newest
Hi seaboard streak,
The Atlas "transition joiners" (half rail joiner / half pin) have proved to be pretty fragile. They work, but they don't hold up to repeated assembly and disassembly. The preferred method to join Atlas and Ross or Gargraves is to use the regular Atlas joiners. With Ross the joiners slip over with a little wiggling. On Gargraves you first need to grind back the bottom dovetail of the rail and then the Atlas joiners will work just fine.
Cut off the bottom v on the gargraves track that go's in tie about 1/2" back form end of rail and cut off atlas coupler's that are one the end's of the tie's that mate with the atlas track, then use the atlas rail jointer's they will slide wright on the bottom of the gargraves track that how I do it .
Guy
