The PS3 E-6's LED headlights work fine. But is there is no light in the cab. On my older Railking PS2 E-8 AA (no LED light) the headlights light up the cab also. Not so for the new PS3 E-6 AA. Is that how it should work?
Original Post
Replies sorted oldest to newest
Probably the way it works, the old one was just incident light that was lighting the cab.
FWIW, there is a cab light output on the PS/3 board that "may" be active, if so you could add one. The bonus would be that it would be automatic, only on when stopped. 
PS-3 has Rule 17 so interior light off in motion. Some units have them low in the cab and hard to see. So you can check if one is there or not. If you want one on all the time you might double up the HL output to drive extra LED or two for the cab, if the unit does not have them. G
Thank you for your responses. GGG there is no light in cab when still or in motion. John I might have you add one for me. I know you are now busy building your layout. Hope it is going well.
George, what's the odds that the cab light output is active in the RK sound file? Of course, you could always shop for a different sound file, but adding a wire and a light seems to be the more direct approach.
