so I had two lighting circuits out at both ends of the layout,,,ok moved out the boxes on the short end,,,looked could see nothing hanging loose,checked connections,nothing,,,got back out,looked at the transformer for that end,i had turned off the power to that feed,,,boooom back on ,now the other end is very full of boxes,ok got them out of the way,again nothing,check this and than,,got volt meter out,,no feed,,,,ok back topside,which is feed from fixed voltage on z4000,switched leeds to other power,back on, 1st dead,ok so guess that is out,,,,,,,,looked down on the side of the z and omg,breaker was out,reset breaker back in business,,,as my dad always said check simple things first,dont overlook the obvious,,,which I did,,,,daaaaaaaaaaaaaaaaaaa,would have saved a good 1hr and 1/2 ,that's life !!!,terry
Original Post
