@NJCJOE posted:12/2/23 - I added portals to each end of the tunnel along with some rock wing walls. These items were also carved from foam like the mountain. This helps finish off the look at the end of the tunnel/mountain. Some finer detail will come later on down the road, but for now it's time to start another project.
That has all the makings of a real masterpiece Joe. Nicely done!
You are very talented Joe. The layout is coming along great.
Hi Joe,
The tunnel came out great ! As the rest of the layout too ! Nice craftsmanship!
Thanks , Alex
Joe, the whole tunnel project came out beautifully. I can understand moving on now and leaving vegetation and detailing to a later time once the major projects are done. I love how you recycled construction plans for your drop cloth.
We used to print up so many sets when we would put out a job for bid we always wound up with extras. I used them to wrap Christmas presents.
I never would have thought about stacking the foam instead vertically instead of horizontally. I think yours was a more efficient way of forming the mountain.
We use those discarded drawings from work for a bunch things.....painting, floor mats at a job site, doodle paper. Comes in handy and it was just going to be recycled anyway.
A Five Star project and layout, Joe! Feels like I’m enrolled in a Master Class! It’s fun following along.
Layout is looking great, can't wait to see the next phases!
Thanks guys. I appreciate the comments. 
MERRY CHRISTMAS!
1/1/24 - Happy New Year everybody!
I got the rock work and tunnel portals constructed and installed on the standard gauge side tunnel. Once again, the rocks and tunnel portals are carved foam. The pictures tell the story. Next I have to do the same thing on the front tunnel entrance, except there I will have two single portals and one double.
wow Joe, that is some nice looking work! It sure makes a statement for that area!
Those are some excellent-looking tunnel portals. Your whole layout looks fantastic. Keep up the good work.
That looks great, Joe!
Lookin' good Joe.
Happy New Year.
Bob
Excellent work and thanks for the step by step Joe, the rock work and portals are terrific.
Andy
@NJCJOE posted:1/1/24 - Happy New Year everybody!
I got the rock work and tunnel portals constructed and installed on the standard gauge side tunnel. Once again, the rocks and tunnel portals are carved foam. The pictures tell the story. Next I have to do the same thing on the front tunnel entrance, except there I will have two single portals and one double
Well done!
Peter
Wow, that is really a beauty of a standard gauge layout, first time I have seen it. That is going to be amazing. It already is actually if you have trains running on it. I like it.
Keep up the good work!
02/02/24 - I decided to construct the front standard gauge mountain/tunnels on the other side of the layout next. So, back to foam carving and painting. 
This area would require two single tunnel portals and one double. The idea here was to create a view that would tie in the rocks along the river with this section of mountain and then finally with the large mountain/tunnel on the upper O gauge portion. This is what the area looked like before I started the rock work.
Here are some shots of getting the rough foam work in place.
And the final result. At some point I will address the inside portions of the tunnels that can be seen. Since this mountain is in sections and removable, I can do that at a later date.
Up next will be the installation of two O gauge bridges.
So, for the past 11 years there has been a modelers meet at the Reading Railroad Heritage Museum in Hamburg, Pa. in September. The name was changed last year to the Anthracite Railroads Modelers Meet. This year it will be Sept. 20, 21 & 22. The meet has modeling clinics, slide shows, Reading museum tours, sales area, modeling contest, etc. On Sunday there are usually 4 or 5 open houses in the area that you can visit. This year I volunteered to have my layout and railroadiana collection as one of the tour stops. So, now I want to get as much done on the layout as I can by September. I work better with a goal anyway. 
If anybody is interested in attending the modelers meet, you can find more information and registration info here.
Very professional looking, Joe.
Tom
That’s turning out to be a great looking layout Joe. I can’t imagine how many hours you have invested so far. Thanks for the heads up for September.
Jay
Joe.......simply magnificent!
Peter
Beautiful! Thank you for sharing this emerging magic! 😊
Wow! That's looking amazing!
Awesome! Love your layout. That's one of a kind.
A continuing work of art, excellent job!
Gene
Joe, you did a great job extending the mountain down and positioning the tunnel portals! It looks very good.
I recently heard of the Anthracite Railroads Modelers Meet, and now I see why I hadn’t heard of it before. Of course living on the other side of the state, there is a lot going on in the east that I haven’t heard of. Congratulations on being on the itinerary.
Great stuff Joe!
Nice work, Joe - the black weathering on the tunnels where smoke would have stained the blocks is a nice touch.
A couple of videos of the standard gauge portion of the layout.
Thank you for sharing Joe. I’m looking forward to the tour in September.
Jay
Hi Joe
The Layout looks fantastic, and the videos are superb. Thank You for posting them. I enjoyed them both, but especially passing at the signal bridge. I recently aquired one of those and enjoyed seeing yours working. I got mine working with red and green lights. have not put it into service yet, needs a couple of hand railing pieces. I don't know if the Dog was too happy coming out from under the bench work as the Hiawatha passed, looked like a nap was disturbed 
On another note, using your Email in your profile I recently sent you two Emails about the MTH Standard Gauge American Flyer Tower you have on offer. I have not received a response.Has the Email changed? I am interested in that tower. My Email is in my profile.
Thank You 
Frank
Yeah, our Corgi pup, Pookah, likes to roam around under the layout trying to figure out what's making all the noise up above. 
The portals look terrific and the waterway came out great as well. 👍
02/22/24 - I found a location on the layout where I wanted to install a couple of truss bridges. I picked up an Atlas Pratt truss bridge at York last October and I ordered a 24" Menard's truss bridge as well. My plan was to install Gargrave's track on the bridges and realistically weather them prior to installation. This was the location I chose.
Once the Atlas track was removed from the Atlas bridge, I painted both bridges flat black. The next step was to determine how I was going to weather these structures. My original plan was to use hairspray and weathering powders like Joey Ricard did in one of his videos, but I was concerned I would not be able to get into all the tight corners and inside the structural members of the bridge.
Searching the web I came across a product called Metal Effects by Modern Masters. It is a paint that contains iron particles. Once the paint is dry it is sprayed with an activator that actually creates real rust. Can't get more realistic than that! 
This was a fun product to use. And it allows you to create rust on anything.
The bridges were brush painted with two coats of the iron paint and left to dry overnight. The paint is grayish in color. I also varied the thickness in places so the overall effect would not be uniform. This is what the bridges looked like after the paint application.
The next day the bridges were sprayed with the activator from a spray bottle. I sprayed two light coats. Once it dried I did go back and spray some more in places that I felt needed more rust. This is what one of the bridges looked like about a half hour after the activator was applied.
And this is how they looked about two hours later. They do appear a little more orange in these photos than they actually were. This was because I forgot I had the camera HDR setting on.
The larger bridge did seem to rust up more than the smaller bridge. I don't know if this was because one was plastic and the other made of wood, or if my paint applications/thicknesses were different. I was able to make them more uniform with the application of the sealer. The sealer is used to stop the rust process, otherwise the object could keep rusting over time. It probably wasn't necessary for this application since the bridges are not made of metal. The sealer also keeps any of the rust from rubbing off. Here they are after the were sealed and the camera HDR setting turned off.
I then installed the track to both bridges with screws installed from underneath.
Next came out the sawsall and I cut out the bench work where the bridges would go. Some new braces and supports would be installed.
I got some bridge abutments from Scenic Express and bridge shoes from Scale City Designs. These items were painted and weathered accordingly. Once the bridge abutments were installed at the correct levels the bridges were mounted in place. Here is the end result.
I'm really happy how these turned out. I still want to install track guard rails on the bridges. I also need to hook up the lights on the Menard's bridge. Here are some close ups of the bridge details.
Looking good Joe! Enjoying this thread!
The bridges are spectacular. Nice work Joe.
Amazing as usual Joe. Bookmarked the link to the company for that paint.
Bob
Sure is a lot of work, bit as Bob said wow what Amazing results 👏
Looks great Joe You can buy Ross track with the Gaurd rail already on it
As always Joe, well done with outstanding results. It’s so realistic looking, that if you touched it you’d get rust on your fingers.
Gene
Access to this requires an OGR Forum Supporting Membership
