Skip to main content

Replies sorted oldest to newest

When I built my display case I cut grooves for both 2 and 3 rail equipment. The 3 rail stuff wouldn't fit in the grooves. The problem was the distance from flange to flange was different so I had to find a happy medium. The flanges are closer together for 3 rail (I assume this is done to make very tight curves) so I can tell you with certainty that flange gauge will not work for 3 rail. I couldn't say about the other gauges as I have never tried them on 3 rail track or rolling stock. 

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×