I installed six O-gauge K-Line O42 switches on my Lionel layout, which is based on tubular track. Most of the switches work like they should; except for one. Recently, the swivel rail on the misbehaving one (a RH switch with RC) became slightly misaligned when thrown in the CURVED position; the swivel rail isn't "seated" in the notch of the outside rail, so a train "bumps" over the switch with a lurch. Not enough (yet) to cause a derailment, but it's worrisome. Is there an adjustment for this? I know there's an adjustment screw on the underside of these switches. Is that an adjustment for the travel of the swivel rail? Advice welcome.
Mike Mottler LCCA 12394
mottlerm@gmail.com
