Skip to main content

Closed2 replies

Okay, I bought the book both the down load which is lost on a kaput computer and the hard copy, but

markermarkerOGR Forum Member

I'm working with the hard copy now, but for me this is the problem.  There is no index with which to refer to my specific questions and I've spent a lot of time looking for the answers.

 

First - Since I bought the digital copy, can I access it again?  If so, I don't have info about passwords, etc, that I used when I bought it, whom would I contact?

 

Second -  The hard copy I have, includes HO but doesn't get that far into PS3 O.  I am moving into 2 rail and some of the PS3 HO features are needed like the ability to sense which rail is carrying which signal, is this feature going to be available in O?  Can you use DC power?  Can you use DC power on a early MTH PS2 2/3 (started as 2 rail) engine?  Can you use the DCS HO commander with O?  If you can use DCS with DC, can you use one TIU for DC and AC at the same time?

 

I have the latest TIU version with remote, can I also use a remote from a the first version TIU in order to have 2 handhelds available?

 

I assume HO uses the same TIU is that correct?

 

I would guess these questions are answered in the book, if so what chapters?

 

Lastly, PS3 engines can be operated by DCC, but DCC engines can't be operated by DCS, correct?

Last edited by marker
Original Post

Replies sorted oldest to newest

Barry BroskowitzBarry BroskowitzOGR Forum Member MEMORIALIZED MEMBER

First - Since I bought the digital copy, can I access it again? 

 

Go to the following link to recover your password:

 

https://www.shopatron.com/acco...ssword?language_id=1

 

I am moving into 2 rail and some of the PS3 HO features are needed like the ability to sense which rail is carrying which signal, is this feature going to be available in O? 

That's an engine question. Contact MTH.

 Can you use DC power?  Can you use DC power on a early MTH PS2 2/3 (started as 2 rail) engine?

Yes and yes.

can you use the DCS HO commander with O?

Yes, as long as you don't draw more than 6 amps.

If you can use DCS with DC, can you use one TIU for DC and AC at the same time?

You can use the fixed channels for AC or DC and the variable channels for AC only, simultaneously.

I have the latest TIU version with remote, can I also use a remote from a the first version TIU in order to have 2 handhelds available?

You can mix and match any DCS TIUs and remotes as long as they all contain the exact same DCS software version.

 I assume HO uses the same TIU is that correct?

Yes.

Last edited by Barry Broskowitz
Views: 589
Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×