Skip to main content

I will be repainting my Amtrak 44 Ton engine.  We are having some debate in the family whether it should be painted like a prototype engine or a fantasy engine.

Option 1 - PRR (We have a 2 PRR Steam Engines, 2 GG-1's and an SW-8 Diesel now)

PRR 44 Ton

Option 2 - B&O (I like Chessie and could assume Chessie never got around to painting it because I can't find and evidence Chessie had any 44 tons in their signature colors)

B&O 44 Ton

Option 3 - SMS Lines (I like this real railroad... But they do not have a 44 ton engine.  So it's a bit of a fantasy)

Screen Shot 2020-05-14 at 8.25.49 PM

I would love to hear your thoughts.

Thanks.

Ron

Attachments

Images (3)
  • B&O 44 Ton
  • Screen Shot 2020-05-14 at 8.25.49 PM
  • PRR 44 Ton
Last edited by Ron045
Original Post

Replies sorted oldest to newest

I think you should go with a fantasy scheme. IT will make it unique and purely yours. Plus it can be fun for yourself and others if you show it off.white pass nw

This is a White Pass and Yukon Route NW-2 switcher that never existed. I got a busted up Seaboard model for cheap and decided to have some fun with it.

Attachments

Images (1)
  • white pass nw

Well there is no right or wrong as mentioned above.     I personally prefer prototype schemes over total fantasy, which makes the SMS scheme somewhere in between.   It is a prototype scheme on a loco they do not have.   I also like fantasy schemes that look like they could be real, better than total fantasy like a "batman" loco or somesuch.   

And another thought, to me it does not look right to take famous, well-known loco like an NYC Hudson, a Big Boy, or Pennsy K4 and paint them for another prototype RR.

All that said, remember rule #1.    "It is my Railroad, and if  you don't like it, there's the door".

No, refer to rule #1.   It is your RR and if you like it is good - - for you.   Actually it looks a like the C&O scheme I think.     We all just have our preferences.     Most of my Diesels are painted for Pennsylvania RR as they painted them in the 1950s with the full wording rather than the big decals and initials.    That is what I like.   I also have a fantasy scheme NW2 painted for the Conemaugh & Juniata RR which belong to my very good friend who died last year.      Now true it is the same as the PRR except for lettering.

The highest visibility, most attention getting scheme would be B&O in the Chessie System paint scheme. 

Andrew

Andrew, 

I do not disagree.  Chessie is MY favorite railroad, so that makes it even more logical.  However, I have only done one repaint so far and it was OK.  I can't even imagine how difficult it would be to paint and mask and paint a Chessie scheme.  I'm just not that good.

To add, this particular engine is going to be difficult because I can't just paint the shell.  The base is part of the job too.  So I need to consider either masking all of the electronics or doing a 100% removal.

Ron

 

imageThis is actually a fantasy scheme. When the Genesee and Wyoming acquired the South Buffalo RR this was the proposed logo. It even appeared on the G&W site. But none of the engines got this logo, rather the South Buffalo got merged into another G&W railroad, the Buffalo and Pittsburgh. So the bison was lost and S B got replaced with B P. Otherwise the colors are correct.

Pete

 

 

Attachments

Images (1)
  • image
@David98 posted:

NH Cranberry Boxcab

K-Line By Lionel did a New Haven boxcab in olive green.  It would be fun to see this re-issued in `The Cranberry' colors.  Not sure who wound up with the rights to the boxcab when the former K-Line dies/molds were divvied up a few years ago.

David

How did you come across a 7+ months old thread?  I'm always curious when older threads are revived.

@Pingman posted:

How did you come across a 7+ months old thread?  I'm always curious when older threads are revived.

What's really strange is I was the OP and next to last post in May '20.

But I just re-read this last night to review feedback on my paint options.  I did not post anything so I did not give it a bump for David98 to find today.

Either way... I have decided to go with falconservice idea of Chessie.

I really liked the idea of SMS and was really excited because a family member works there.  When I told him about it, he scoffed because SMS does not have a 44 ton.  He did not seem appreciative, so screw it, I'll go with my favorite railroad.

I'm kitbashing a Chessie transfer caboose to go with it.  That appears to have been real, but I can only find two pictures of it online.  The transfer caboose will hold the battery and BlueRail board.  I'll run the engine in DCC mode.

images

Decals purchased and in the mail.  Hope to buy paint this weekend.

Have Fun.  Ron

Attachments

Images (1)
  • images

NH Green-Orange-Striped Boxcab

How did this thread get revived?  I recalled seeing a very nice project done by someone in the past year or so, repainting one of these KBL boxcabs - I think in the NH McGinness color-block scheme.  I was using the "Search" feature to try to find it, and could not; but this subject was close enough.

So here is the other NH fantasy boxcab idea!

David

Attachments

Images (1)
  • NH Green-Orange-Striped Boxcab

Well it took me a while to get this one done, but I finally reached the finish line.  I had to take it down to bare metal 3 times before I could get the paint the way I like it.  It was frustrating, I'm glad it's over, but I'm also glad I did it.

I want to again thank falconservice for his recommendation of Chessie colors.  I was really debating on just how to repaint this engine to please others.  Then I decided since Chessie is MY favorite railroad and I do not have any Chessie engines, that I would do this one for myself.

While Chessie did not have any 44 tonners, the B&O, C&O and Western MD all did.  So it's not such a stretch to pretend that WM decided to keep their 44 Ton #75 instead of selling it in 1964 to U.S. Plywood.  Naturally during the merger years, WM #75 would have been repainted into Chessie... as I have interpreted below using pictures of other Chessie diesels as a guide.

I also kitbashed a transfer caboose to go with this engine.  Details on that are here.

Have Fun!

Ron

IMG_20201223_083229719 [1)File_000File_001File_002File_003

Attachments

Images (5)
  • IMG_20201223_083229719 (1)
  • File_000
  • File_001
  • File_002
  • File_003

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×